News

  • The chain belongs to consumable material and needs to be replaced regularly

    The chain belongs to the transmission element and is consumable. It needs to be replaced regularly to ensure the normal operation of the equipment. When the sprocket needs to be replaced, the old sprocket needs to be removed and replaced with a new one. Professionals are required to operate the s...
    Read more
  • How to check the quality of lifting chain

    Check the lifting chain, the first check whether the lifting chain deformation, whether there are small cracks, rust, etc. Qualified lifting chain without defects affecting appearance. In order to check the lifting chain manufacturing details, we can check from the lifting chain wrapping paper we...
    Read more
  • Do you know how to clean the chain?

    Most of the chain in the market is made of stainless steel, because the raw material of stainless steel is relatively hard. Strong load-bearing force, but when the use of a long period of time, it will also be stained with sludge, oil stains and other effects of use, so how do we use it in the pr...
    Read more
  • Do you know how to clean the chain?

    Most of the chain in the market is made of stainless steel, because the raw material of stainless steel is relatively hard. Strong load-bearing force, but when the use of a long period of time, it will also be stained with sludge, oil stains and other effects of use, so how do we use it in the pr...
    Read more
  • Chain maintenance and maintenance

    1. Sprocket should be installed on the shaft without skew and swing. The end faces of the two sprockets in the same transmission assembly of the chain manufacturer shall be located in the same plane. When the center distance of the sprockets is less than 0.5 meters, a deviation of 1 mm shall be a...
    Read more
  • Chain manufacturer’s chain maintenance

    1. Sprocket should be installed on the shaft without skew and swing. The end faces of the two sprockets in the same transmission assembly of the chain manufacturer shall be located in the same plane. When the distance between the sprockets is less than 0.5 meters, a deviation of 1 mm shall be all...
    Read more
  • How should the chain be maintained

    How to maintain shenyang chain, do you know? 1. Refueling and maintenance of the chain Frequent addition of lubricating oil to various parts of the chain can effectively reduce wear of the chain and sprocket. 2. Tension of the chain Please confirm the tensioning of each chain, too tight will add ...
    Read more
  • Basic knowledge of chain drive

    1. What is the cause of excessive chain noise produced by the chain manufacturer? What should I do? There are many reasons for excessive chain noise, including the following aspects: First, sprockets are not aligned and offset, and conflicts between sprockets and chains cause noise to be added. P...
    Read more
  • Chain cleaning and maintenance time

    1. Reduced variable speed performance during cycling.   2. Too much dust or sludge on the chain.   3. Noise is generated when the transmission system is running.   4. Cluck while pedaling because the chain is dry.   5. Leave in the rain for a long time.   6. When driving ...
    Read more
  • What is the common lubrication of the chain

              The manufacturer of the chain, Linyi Kangwei Chain Co., LTD., introduces the common lubrication method of the chain: Ⅰ – artificial regularly in oil pot or painting to oil; Ⅱ – oil drip lubrication, oil cup to the loose side chain plate inside and o...
    Read more
  • What effect does the rolling plating process of galvanized chain have?

    Roll plating is a method of processing galvanized iron chain, it is a certain number of small parts placed in a special drum, under the rolling state, in an indirect conductive way to make the surface of the parts deposited on a variety of metal or alloy coating, in order to achieve the surface p...
    Read more
  • How can ring chains reduce wear

    Shandong chain manufacturer, Linyi Kangwei Chain Co., LTD.   Ring chain is made up of multiple metal ring, it is mainly used for important lifting device with hoisting machinery operation, due to the load is relatively large, the frequent use for a long time, the wear degree is more and more...
    Read more
12 Next > >> Page 1 / 2
WhatsApp Online Chat !